Product Description

Flange Input Right Angle High Output Torque Planetary Gearbox With CHINAMFG Input Shaft

Description:
N series of planetary reducers from SGR are widely used for industrial and heavy duty severe applications . planetary reducer feature with compact size, low noise , excellent reliability ,long life . In-line or right-angle planetary gearboxes are available in male and female shaft configurations. The CHINAMFG male shaft solution (splined or cylindrical) is able to withstand strong radial or axial loads on the output shaft. As a leading planetary gearbox manufactory in China , SGR planetary reducer is produced by modular design, combined according to customer requirement, housing material from CHINAMFG with nodular cast iron which can increases gearbox’s rigidity and antiknock, heavy-duty bearing is installed at low-speed shaft, it can bear big radial load due to proportionate distribution of torque ,every CHINAMFG gears are case hardened to get high reliability and long life .

Key feature:

  • Planetary gearbox is produced by modular design, and can be combined according to client’s request
  • Involuted planetary gear design
  •  Nodular cast iron Housing to increase rigidity and antiknock
  • Heavy duty bearing on low‐speed shaft, and can bear big radial load due to proportionate distribution of   torque
  • All gears are case hardened to get high surface hardness, which guarantee transmission efficiency and whole gearbox’s life
  • Planetary gearbox has 16 models for different torque range, and each model have 1‐5 reduction stages to achieve different ratios
  • Ratio range: 3.15‐9N. M
  • Output speed: 0.425‐445 r/min
  • Structure mode: Possibility of flange, foot, or shaft mounting solutions
  • Wide and comprehensive range of N series for industrial applications
  • Low speed shaft design: Cylindrical with key, splined, hollow with shrink disc or splined hollow shaft
  • Rigid and precise nodular cast iron casing
  • Low noise running, high manufacturing quality standard
  • High and reliable performance, load capacity and low speed shaft bearing

N series planetary gearbox torque sheet with models

Gear unit size 200 201 240 241 280 281 353/354 355 400 401
Normal output torque
T2N[Nm]
1500 2000 3500 4000 4300 7300 13000 16000 20000 23000
Gear unit size 428 429 445 446 510 542 543 695 810 885
Normal output torque
T2N[Nm]
26000 30000 32000 43000 63000 75000 100000 150000 300000 420000

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened
Installation: Horizontal Type
Step: Four-Step
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

angle gearbox

Disadvantages and Limitations of Angle Gearbox Systems

While angle gearbox systems offer numerous advantages, there are also some disadvantages and limitations to consider:

  • Complex Design: Angle gearboxes can have a more complex design compared to standard gearboxes, which can make them harder to manufacture, assemble, and maintain. This complexity can also lead to higher production costs.
  • Efficiency Loss: Due to the multiple gear stages and changes in direction of motion, angle gearboxes can experience higher friction and efficiency losses compared to straight-line gearboxes. This can result in some energy loss and heat generation.
  • Space Constraints: The design of angle gearboxes often requires more space to accommodate the multiple gear stages and components, which can be a limitation in applications with limited space.
  • Increased Maintenance: The complex design of angle gearboxes can lead to increased maintenance requirements. Components such as bearings, seals, and gears may need more frequent inspections and replacements.
  • Cost: Angle gearboxes can be more expensive to produce and maintain due to their intricate design and the precision required in manufacturing. This can impact the overall cost of the machinery or equipment in which they are used.

Despite these limitations, angle gearbox systems are chosen when their benefits outweigh their drawbacks for specific applications. Engineers and designers carefully assess the requirements of the application to determine if an angle gearbox is the optimal solution, taking into account factors such as space availability, load demands, efficiency considerations, and budget constraints.

angle gearbox

Essential Maintenance Practices for Prolonging the Lifespan of Angle Gearboxes

Maintaining angle gearboxes is vital to ensure their longevity and optimal performance. Here are some essential maintenance practices:

  • Lubrication: Regularly check and replenish lubrication to minimize friction and wear between gears and bearings. Use the recommended lubricant and follow the manufacturer’s guidelines.
  • Sealing: Ensure that seals and gaskets are in good condition to prevent contaminants from entering the gearbox and causing damage. Replace seals if they show signs of wear or leakage.
  • Inspection: Periodically inspect the gearbox for signs of wear, damage, or unusual noise during operation. Address any issues promptly to prevent further damage.
  • Alignment: Ensure proper alignment of the gearbox with connected components to prevent excessive load on gears and bearings. Misalignment can lead to premature wear and reduced efficiency.
  • Tightening: Check and tighten bolts, fasteners, and mounting hardware to prevent loosening due to vibrations. Loose components can lead to misalignment and damage.
  • Cleaning: Keep the exterior of the gearbox clean to prevent the accumulation of dirt and debris, which can affect cooling and ventilation.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox to ensure it remains within recommended limits. Excessive heat can degrade lubricants and lead to premature wear.
  • Replacement of Wear Parts: Replace worn or damaged components, such as gears, bearings, and seals, with high-quality replacements to maintain optimal performance.
  • Proper Usage: Operate the gearbox within its specified load and speed limits. Avoid overloading the gearbox, as this can lead to premature failure.

Following these maintenance practices helps prolong the lifespan of angle gearboxes, reduce the risk of unexpected failures, and ensure consistent and efficient operation in various mechanical applications.

angle gearbox

Handling Variations in Input and Output Angles with Angle Gearboxes

Angle gearboxes are specifically designed to handle variations in input and output angles, allowing for efficient redirection of rotational motion. They achieve this through the use of bevel gears and hypoid gears. Here’s how they handle such variations:

  • Bevel Gears: Angle gearboxes equipped with bevel gears can handle changes in input and output angles by using intersecting axes. These gears have conical shapes and teeth that are cut along the cone surface. When the input shaft’s bevel gear meshes with the output shaft’s bevel gear, the intersecting angles allow for smooth power transmission even when the axes are not aligned.
  • Hypoid Gears: Hypoid gear arrangements in angle gearboxes can handle larger variations in input and output angles compared to bevel gears. Hypoid gears have helical teeth and axes that are offset from each other. This offset allows for greater flexibility in handling non-parallel input and output shafts.

By employing these gear types, angle gearboxes can effectively manage variations in input and output angles, ensuring that rotational motion is smoothly redirected without compromising efficiency or causing excessive wear on the gears.

China Best Sales Flange Input Right Angle High Output Torque Planetary Gearbox with CZPT Input Shaft   comer gearbox	China Best Sales Flange Input Right Angle High Output Torque Planetary Gearbox with CZPT Input Shaft   comer gearbox
editor by CX 2024-04-03